Bleed Kit Filler Kit For Seastar Hydraulic Steering Systems Bridge Tube & Hose

Description

Features:
Material: Anti-oxidation, corrosion resistance ,leak free connection,durability and safty
Entire steering system remains sealed during the bleed process from end to end
Install:Easy to attach and use
Application:Used to refilling boat's steering system fluid
Compatibility with seastar hydraulic steering systems
Specification:
Bridge Tube length: 45 cm
Hose length: 46 cm
Material:
Quick-connect:brass
Screw cap:ABS
Tube:Polyurethane
Hose with 1/4 Straight Pipe Thread Screw Cap
Packing include:
1x Hose
1x Bridge Tube
Installation:
1.Attach bottle to helm reservoir (Don't pierce bottle and don't let bottle run empty)
2.Connect bridge tube to bleed fittings on steering cylander and loosen/open fittings
3.Use helm to pump fluid through system by turning the wheel in one direction. Air bubbles will be pushed to the reservoir at the helm
4.Manually swing the outboard through full articulation to fully relieve trapped air
5.Note: Orientating bleed fittings up while pumping fluid with helm will allow air to escape from cylinder
6.Repeat 3-4 as nessasary until there is not any air in bridge tube
7.Tighten bleed fittings before removing bridge tube