E.Z. Steer EZ 60002 Adjustable 23"-36" Outboard To Outboard Steering Kit

Description

This listing is for a unused E.Z.STEER brand Model EZ 60002 outboard to outboard 23" to 36" adjustable steering kit.
The exterior box was damaged and will not be included to save shipping costs , but I have included pictures of the original box.
The 3 pieces in the kit were sealed in plastic, and  I have taken pictures of them to show they were never opened for use before I opened them .
I opened the sealed plastic envelopes in the kit, just for the pictures to show they are new unused and complete.
Please read my description and look at the pictures carefully to make sure what you are bidding on,  is what you expect to get.
The following is based on the manufacturers product description:
The EZ 60002 outboard to outboard steering kit is adjustable from 23" to 36"
The E.Z. Steer system is a patented self-adjusting rod, which steers the auxiliary outboard motor from the main wheel. The rod will self-adjust by using the built in turn stops on the engines. When both engines are in the down running position and straight ahead, the rod will be at its shortest measurement. With the auxiliary motor in the raised position, the rod will extend the first time the main unit is turned away. Then, as the main unit turns back and forth, the auxiliary unit will follow the main unit. When the auxiliary engine is lowered, the rod will shorten the first time the main unit is turned towards it. Again, the auxiliary will follow the main unit back and forth.
The only self-adjusting steering system to attach two outboards or a stern drive to an auxiliary. There is no need to disconnect the rod to independently raise or lower either unit. There are no holes to drill in any engine for installation and all hardware supplied is stainless steel. Brackets are stainless steel dipped in black vinyl to prevent scratching the engines. Quick connectors are brass with stainless steel balls and spring. The self-adjusting rod is stainless steel with brass and "Dupont Delrin ball joints, which easily attach to the quick connectors.
Outboard to Outboard kit consists of:
Main engine band assembly
Auxiliary engine band assembly
Rod assembly 23" - 36"