HS5157 Seastar Uflex Hydraulic Steering Cylinder Seal Kit Support Bracket Puller

Description

HS5157 Seastar Uflex Hydraulic Steering Cylinder Seal Kit Support Bracket Puller
Steering Support Bracket Puller
Used to safer removes support brackets for seastar and uflex. Can minimize damage, gouges and scrapes to the steering bracket during removal process. Works great.
Steering Cylinder Seal Kit
Used to install the pivot/front hydraulic steering cylinders for seastar. Can help you repair leaking/weeping cylinder seals, rebuild the outboard front mount hydraulic cylinders, prevent the leaking of fluid and optimizing efficient performance.
Used to repair leaking or weeping cylinder seals. Replacement hydraulic seal kit fits for Seastar pivot / front mount hydraulic steering cylinders on outboard motors. Kit fits most outboard boats with single or twin engines.
Bleed Filler Kit
Helps better and efficiently to fill or bleed for seastar, baystar or hynautic steering systems. One person easily controls the bleed process to change out fluid bottles quickly and cleanly.Used for refilling your boat's steering system fluid.
Includes a Bottle to Helm Tube, a Bridge Tube that connects to Bleed fittings, and an extra male fitting for flushing the system of old fluid.
Perfect Combination
These 3 kits will make you work on steering system for seastar more simple, safe and convenient.
Satisfaction Guarantee
If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days. Premium Support & 1-Year Warranty.
Steering Support Bracket Puller & HS5157 kit
Fits front mount cylinder parts:
HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755( All Model Front-Mount Cylinders Except HC5340.
-HC5345, HC5340 and HC5342 (threaded end gland.
-HC5347 (Pivot Cylinder, Honda 115-130 specific.,
-HC5348 (Pivot Cylinder, OMC 77-90 specific.,
-HC5365 (Compact Cylinder (threaded end gland..,
-HC5394 (SeaRay Compact Cylinder (obsolete. (threaded gland...
Features:
1. Puller helps safely remove SeaStar and Uflex support brackets.HS5157 is a replacement front seal kit for SeaStar pivot / front mount cylinders. Used to repair leaking or weeping cylinder seals.
2. Designed to minimize damage to the steering bracket during removal process. Works great while minimizing ugly gouges and scrapes on your brackets.Failure to replace a damaged steering cylinder will result in seal failure and possible loss of steering.
3. Puller - High strength forged steel with black oxide finish. HS5157 - Made From High Quality Aircraft Grade Aluminum. Ensure a long life service.
4. Used to repair leaking or weeping cylinder seals. Rebuild the outboard front mount hydraulic cylinders, preventing the leaking of fluid and optimizing efficient performance.
Puller Benefits:
- Save your TIME & ENERGY when Working on Seastar re-seal.
- It will remove the toughest Seastar support brackets in under a minute!
- High Strength Stainless Steel for a long life service.
HS5157 Kit  Function:
It is important that you inspect the cylinder rod that it has no scratches, nicks or damaged in anyway, if so, the complete cylinder must be replaced. Failure to replace a damaged steering cylinder will result in seal failure and possible loss of steering. Do not remove shaft from steering cylinder. Bleeding the system to remove any air, replace with Seastar Hydraulic Oil HA5340 only. Check for smooth operations and full travel of the cylinder. Check for no leaking.
2pcs Bleed Kit Filler Kit Bridge Helm Tube
Fitment:
This bleed kit is compatible with Seastar hydraulic steering systems. Used for refilling your boat's steering system fluid.
Features:
1. Helm Filter Tube--Use for all inboard/outboard, outboard, and inboard Seastar hydraulic helms.Hose with screw cap which fits SeaStar or equivalent oil bottles. Allows for clean bleed when used properly.
2. Bridge Tube-- Used to connect to Seastar two Bleed fittings on steering cylinder. It can much improve clearance between cylinder bleed valves and bottom of engine compartment.
3. High quality brass fitting and PVC tube ensure excellent mechanical and physical properties. This product shows its good anti-oxidation, corrosion resistance and durability.
Note:
Simple yet effective bleed system for Seastar hydraulic steering systems.
Standard Seastar helm to bottle fitting - do not pierce bottle (PN:HA5430H.
Custom bridge tube connects bleed ports on steering cylinder.
Basic Instructions:
1.
Attach bottle to helm reservoir (do not pierce bottle.(do not let bottle run empty.
2.
Connect bridge tube to bleed fittings on steering cylinder and loosen fittings
3.
Use helm to pump fluid through system by turning the wheel in one direction. Air bubbles will be pushed to the reservoir at the helm
4.
Manually swing the outboard through full articulation to relieve trapped air and confirm good bleed
5.
Note: Orientating bleed fittings up while pumping fluid with helm will allow air to escape cylinder
6.
Repeat 3-4 as necessary until no air is visible in bridge tube
7.
Tighten bleed fittings before removing bridge tube
Package Includes:
①Bleed Kit includes 1 x hose with screw cap which fits SeaStar or equivalent oil bottles, 1 x Bridge Tube that connects to Seastar Bleed fittings.
②1 x Steering Support Bracket Puller,
③HS5157 kit includes 2 x Seal Glands, 1 x Seal Gland Assembly Guide Tool, 1 x Pin Holder, 8 x varies O-rings.
Payment
Delivery
Return & Warranty
About us
Contact us
Payment
1.We accept PayPal payment and many other payments. Items will be shipped within 1 business day of receiving full payment.
Delivery
1.All items will be shipped out in 1 business day,no expedited service available.
2.Our items will be delivered within 4-6 business days.
3.We have multiple warehouses in US, and will choose the nearest one for shipping, according to your address and our inventory
Return & Warranty
1. All of our items come with a 60-day return policy and 1 year warranty.
2. All return requests must be submitted through your eBay account.
3. Return shipping shall be the responsibility of the buyer. We pay the shipping when it is our fault.
4. Items to be returned must be in resalable condition.
5. All returns are for refund ONLY. No exchange accepted.
About us
1.Our company has professional car knowledge and we also have high-quality and low-cost suppliers around the world.
2.Until now, we have helped many car enthusiasts and mechanics experience the joy at a lower price under the belief of "keen on joy, explore machinery".
Contact us
1.Contact us via ebay message only.
2.All emails will be responded to within 12-24 hours