Hydraulic Steering Systems Bleeder Hose Boat Bleed Kit Filler Kit For Seastar

Description

GREAT COMPATIBILITY:
This bleed kit is compatible with Seastar hydraulic steering systems. Used for refilling your boat's steering system fluid.
FUNCTION:
Seastar Bottle to Helm Tube faciltates filling or bleeding SeaStar, BayStar or Hynautic steering systems. Kit includes hose with screw cap which fits SeaStar or equivalent oil bottles. End of tube includes fitting that screws into the helm pump. Custom bridge tube connects bleed ports on steering cylinder.
MATERIAL:
We created and engineered this kit using top quality materials for professional level reliability and durability.
THIS BLEED KIT INCLUDES:
A Seastar Bottle to Helm Tube and a Bridge Tube that connects to Seastar Bleed fittings.
Advantages:
Entire steering system remains sealed during the bleed process from end to end -- Changing out fluid bottles is quick and clean!
Instruction:
1. Attach bottle to helm reservoir (do not pierce bottle)(do not let bottle run empty)
2. Connect bridge tube to bleed fittings on steering cylander and loosen/open fittings.
3. Use helm to pump fluid through system by turning the wheel in one direction. Air bubbles will be pushed to the reservoir at the helm.
4. Manually swing the outboard through full articulation to relieve trapped air and confirm good bleed.
5. Note: Orientating bleed fittings up while pumping fluid with helm will allow air to escape cylinder.
6. Repeat 3-4 as nessasary until no air is visible in bridge tube.
7. Tighten bleed fittings before removing bridge tube.
Note:
Simple yet effective bleed system fit for Seastar hydraulic steering systems.
Standard helm to bottle fitting - do not pierce bottle (PN:HA5430H)
Custom bridge tube connects bleed ports on steering cylinder.
Package Included:
1 x Seastar Bottle to Helm Tube
1 x Bridge Tube that connects to Seastar Bleed fittings