REBUILT EVINRUDE SIMPLEX OMC JOHNSON 2 LEVER OUTBOARD CONTROL BOX 10' CABLES

Description

DESCRIPTION:
Evinrude Dual (2) Lever Simplex Remote Control Box
Identical to Johnson Ship-Master remote control boxes
P/N: 173286 / 0173286
This is a super condition, excellent working reconditioned control box.
Complete with standard 1979 and after (fits 1953 and up) Type 479 OMC Snap-In throttle and shift cables and connector ends.
Shift cable (near side of outboard) and throttle cable (far side of outboard) are 10' long.
Box is multi-directional - can easily be converted from starboard to port surface mounting.
Light-duty aftermarket plastic replacement boxes without cables or ends are retailing for 9.95 and are nowhere comparable to the original rugged cast aluminum OMC box sold here.
At most marine stores new cables retail for .49 each and do not include shift and throttle cable end connectors.
Includes port and starboard cable clamps & fasteners for attaching cables to outboard.
Includes 8-page Remote Control Installation and Operating Instructions
APPLICATION:
Johnson/Evinrude/Gale Outboards --- 1953 thru current (with appropriate adapters) manual shift, NOT electric shift
Box comes rigged with two Type 479 Teleflex / OMC Snap-In control cables (standard cables that will work for 1953 thru current Evin/John)
Also rigged with throttle and shift cable end connectors
CONDITION:
Repowered boat take-out box
New Teleflex throttle cable
Exc. condition shift cable
New end adapters.
Nothing to hide - look at the 11 pictures,
including the inside
!
From a fresh water lake so NO damaging salt water corrosion.
Inside is super clean -
no sand, no old caked on grease, no insect nests
Newly reconditioned mechanicals - no missing parts, no broken parts, no parts needing repair.
Completely disassembled, cleaned, inspected, lubed, and reassembled
Refinished in matching Evinrude silver/gray paint
One new and one like new
cable enable levers to move smooth and easy.
Includes port & starboard cable clamps & fasteners for attaching cables to outboard.
Includes 8-page Remote Control Installation and Operating Instructions.
Everything is here - just hook up cables to your outboard and fasten box to your boat.
CABLE MEASUREMENT:
10' factory cable measurements are taken from the brass tube end to brass tube end.
If you are measuring just the length of the black vinyl jacket, the 10' cable vinyl measurement would be 8 foot 10-1/2 inches..
RETURNS:
Please look at the pictures carefully.
Check your cable ends and application.
If you have any questions, please ask them prior to bidding.
Sorry, factory warranty expired 35 years ago, I will not be responsible for mis-ordered parts and no returns will be accepted.
SHIPPING:
You will only be charged postage for a  19" X 18" X 7"  8 lb. carton, no additional "handling" fees will be added.